Happy Prefabricated Warehouse - Cold Form (Galvanized)
หากท่านกำลังมองหาโกดังสำเร็จรูปที่มีความมั่นคง คงทน พร้อมรับมือกับทุกสภาพอากาศ และเหมาะสมกับสภาพอากาศร้อนชื้นแบบประเทศไทย ทางแฮปปี้ขอแนะนำโกดังสำเร็จรูป ที่มีการป้องกันสนิมกับเหล็กทุกรูปแบบ มีการชุปซิงค์เพื่อป้องกันการเกิดสนิมก่อนการประกอบโครงสร้างทุกครั้ง มั่นใจได้ว่าอายุการใช้งานของโกดังมีอายุนานกว่า 50 ปี อย่างแน่นอน เหล็กที่ใช้ได้รับมาตราฐานตามอุตสหกรรม และมีการควบคุมคุณภาพตามหลักวิศวกรรม มากไปกว่านั้นทางเรายังรับประกันโครงสร้างถึง 10 ปี ระยะเวลาติดตั้งเพียงแค่ 90 วัน
การเลือกสร้างโกดังสำเร็จรูป เป็นวิธีการแก้ปัญหาอย่างรวดเร็ว ผลงานโกดังสำเร็จรูปขนาดความกว้าง 24 เมตร ความยาว 35 เมตร และความสูง 6 เมตร ทางบริษัทได้ทำการสร้างโครงสร้างที่โรงงาน และนำโครงสร้างที่ขึ้นรูปแล้วไปประกอบที่หน้างาน เพื่อลดระยะเวลาในการก่อสร้าง ลดค่าแรง รวมไปถึงงบประมาณไม่บานปลาย เนื่องจากเราทำใบเสนอราคาให้กับลูกค้าก่อนเริ่มงานเสมอ บริษัทจะไม่มีแบบตายตัว เพื่อให้ลูกค้าได้รับผลงานที่ต้องการ เราจึงเลือกที่จะสร้างตามความต้องการของลูกค้า เพื่อตอบโจทย์ในการใช้งาน
Happy Prefabricated Warehouse เหล็กรีดเย็น หรือกัลวาไนซ์ เหมาะสำหรับโกดังที่ความสูง 4-6 เมตร ระยะห่างระหว่างช่วงเสาไม่เกิน 2 เมตร ความกว้างอาคารไม่เกิน 15 เมตร เหมาะสำหรับโกดังขนาดเล็ก ประหยุดต้นทุนในการสร้าง รูปแบบโกดัง C หรือ Cold Form
ทางบริษัทได้ใช้เหล็กกัลวาไนซ์ (Galvanized) เพราะได้รับมาตราฐาน ปลอดภัย มีอายุการใช้งานยาวนานกว่าเหล็กตามท้องตลาด เนื่องจากเหล็กกัลวาไนซ์ทนทานต่อสภาพอากาศร้อนชื้นตามภูมิอากาศของไทย ทนทานต่อการกัดกร่อน และการเกิดสนิม เกิดปัญหาในการใช้งานน้อย ไม่จำเป็นต้องบำรุงรักษาโครงสร้างเป็นประจำ เหล็กกัลวาไนซ์ที่ทางเรานำมาใช้คือ JIS G3101 SS400 และ G345
JISG3101 SS400 เป็นเหล็กแผ่นชนิดหนึ่งภายใต้มาตรฐาน JIS ซึ่งใช้ในการสร้างเรือสะพานเป็นของแผ่นความแข็งแรงสูง JISG3101 SS400 เทียบเท่ากับ DIN: St37-2, EN: S235JR, ASTM: A283C และ UNI: FE360B
มาตราฐานเหล็กของ Happy Prefabricated Warehouse - C
1.มาตรฐานเหล็กระบบญี่ปุ่น JIS (Japanese Industrial Standards)
การจำแนกประเภทของเหล็กตามมาตรฐานญี่ปุ่นซึ่งจัดวางระบบโดยสำนักงานมาตรฐาน อุตสาหกรรมญี่ปุ่น (Japaness Industrial Standards, JIS) จะแบ่งเหล็กตามลักษณะงานที่ใช้ โดยมาตรฐานจะเป็นตัวอักษรและตัวเลข หรือบางครั้งอาจจะ เป็นตัวอักษรเพียงอย่างเดียว ซึ่งตามหลังอักษร JIS ดังตัวอย่างต่อไปนี้
โดยเหล็กสามารถจำแนกได้หลากหลายรูปแบบ ดังนี้
ส่วนประกอบ เช่น คาร์บอน, อัลลอยด์ต่ำ หรือเหล็กกล้าไร้สนิม
วิธีการผลิต เช่น โอเพนฮาร์ท, เบสิกออกซิเจน หรือวิธีอิเล็คตริกเฟอแนนซ์
วิธีการรีดละเอียด เช่น รีดร้อน, รีดเย็น, การตกแต่งผิว และเทคนิคการชุบ
รูปแบบผลิตภัณฑ์ เช่น สลัก, แผ่น, แผ่นบาง, ท่อ หรือรูปแบบโครงสร้าง
การทำดีฮ๊อกซิเดชัน เช่น คึล, เซมิคีล
โรงสร้างจุลภาค เช่น เฟอริติก, เพิร์ลไลท์ และมาร์เตนซิติก
การอบร้อน เช่น การหล่อ, การชุบแข็ง และการคืนตัว
สำหรับมาตรฐานเหล็กอุตสาหกรรมที่เป็นที่นิยมใช้กันเป็นมาตรฐานสากลมีอยู่หลากหลายมาตรฐาน สามารถแยกได้ดังนี้ ระบบอเมริกา ระบบเยอรมัน ระบบญี่ปุ่น และระบบของสมอ. หรือ มอก. นอกจากนี้ยังมีระบบยุโรปที่ใช้เป็นมาตรฐานสากลอีกระบบหนึ่งด้วย ซึ่งการกำหนดมาตรฐานจะขึ้นอยู่กับแต่ละประเทศที่เป็นผู้กำหนด
เสาเหล็ก : Galvanized Steel Square Tube G345
คานเหล็ก : Galvanized Steel Square Tube G345
โครงหลังคา : Galvanized Steel Square Tube G345
J-Bolt : Steel Grade SCM440
แปหลังคา : Omega Purlin G345, G450
แปผนัง : Omega Purlin G345, G450
น็อต สกรู ข้อต่อ : AS2331, AS3566 (Australia Standard)
ข้อดีของโกดังสำเร็จรูป Happy Warehouse มีดังต่อไปนี้
1.เรามีประสบการณ์งานก่อสร้างโกดังโรงงานมากกว่า 300 โครงการ
2.เรามีประสบการณ์ด้านงานก่อสร้างโกดังมากกว่า 14 ปี
3.เราเป็นโรงงานผลิต ทำให้สามารถควบคุมคุณภาพได้มากกว่าระบบก่อสร้างหน้าไชส์งาน และมีประสบการณ์ตรงในการก่อสร้างอาคารสำเร็จรูป
4.เรารับเหมางานก่อสร้างทั้งระบบตั้งแต่ ออกแบบงาน ก่สร้างงานฐานรากจนถึงตัวอาคารและสถาปัต
5.ใบเสนอราคาออกจากส่วนกลางโดยใช้โปรแกรมคำนวณวัสดุตามความเป็นจริง น่าเชื่อถือ ไม่บวกมูลค่างานเกินความเป็นจริง
6.หลังคาเมทัลชีทแบบ Clip Lock เรารับประกันงานรั่วซึม 3 ปี และรับประกันโครงสร้าง 10 ปี
7.การเสนอราคารวดเร็วเที่ยงตรง เป็นบริษัทเดียวที่สามารถเสนอราคาได้ในเวลาเพียง 5 นาที
8.เหล็กโครงหลังคาและแปเราใช้เหล็กกาวาไนช์ ทำให้ทนสนิมอายุการใช้งานยาวนาน ความแข็งแรง 3500 KSC
9.หลังคาเราเป็นระบบคลิ๊ปล็อคทำให้ไม่มีการยิงน็อตจากหลังคาลดความเสี่ยงหลังคารั่ว
10.ลูกค้าทำสัญญากับบริษัทผู้ผลิตโดยตรงทำให้ลูกค้ามั่นใจในการรับประกัน และเงินไม่สูญ ไม่ผ่านคนกลาง
Happy Prefabricated Warehouse - Cold Form Galvanization or Cold rolled steel (HW-C)
Are you looking for a cost-effective and fast solution for your storage or industrial needs? Consider our HW-C prefabricated warehouse building. This structure is manufactured in a factory and then transported and assembled on-site, saving you time and money. Plus, it can be fully customized to meet your specific requirements.
HW-C is suitable for the height building is not exceeding 6 meters. The column distance 2 meters, Galvanize Square Tube 2x4 inch. Width building is not exceeding 15 meters. (Cannot install mezzanine).
The Structure is Galvanize G345 and Roof Structure is G345 HW-C for small and medium warehouse size. We build the warehouse structure within 45 days
What Are the Advantages of Galvanized Steels?
1.Rust Resilience: Zinc provides a protective barrier to the steel, creating a defense against oxygen, moisture, and other environmental conditions.
2.Extended Life Span: Once galvanized, a sheet of industrial steel is estimated to last over 50 years in moderate environments, and more than 20 years in environments with severe water exposure.
3.No Maintenance Required: Once dipped in zinc, galvanized steel does not require any further conversion.
4.Easy Inspection: It is possible to determine the strength of the galvanized steel just by looking at it. However, stress tests are quick and easy to perform and indicate how thick the layer of zinc is and therefore how much protection the steel has.
Galvanized Advantage
Galvanized steel is a steel that has a protective zinc coating on its outer surface. The zinc is used to increase the steel's corrosion resistance and is applied most commonly by hot dipping the steel into molten zinc.
The zinc can also be annealed after the hot dipping process or electroplated to the steel. Galvanized steel can be used in a variety of applications, the only common factor being the applications needed for corrosion resistance. Galvanized steel is used in construction, aerospace, automotive, oil & gas, and many other industries.
How Does Galvanized Steel Differ from Regular Steel?
The main difference between galvanized steel and regular steel is the protective barrier formed by the addition of zinc to the surface of galvanized steel. This zinc makes galvanized steel much more durable, robust, and rust-resistant. Whereas galvanized steel has been coated in zinc, regular steel is predominantly made of iron which will corrode when exposed to moisture.
Galvanized steel is made of regular steel sheets (or manufactured items) that are dipped in a bath of molten zinc and left to cool. This creates an outer layer that is metallurgically bonded to the steel. The resultant surface metal is in the form of an alloy that takes on both the properties of steel and zinc.
Steel Standard of Happy Prefabricated Warehouse - C
1.JIS are the standards used for industrial activities in Japan, coordinated by the Japanese Industrial Standards Committee (JISC) and published by the Japanese Standards Association (JSA). Japan’s research and development expenses rank high with other countries, spending 18.4 trillion yen in 2016. With the focus on high technology research, your materials need to meet Japan’s stringent high barrier needs.
Some Components of prefabricated warehouse building:
Steel column: Galvanized Steel Square Tube G345
Steel beam: Galvanized Steel Square Tube G345
Roof Structure: Galvanized Steel Square Tube G345
J-Bolt: Steel Grade SCM440
Roof purlins: Omega Purlin G345, G450
Wall purlins: Omega Purlin G345, G450
Screw: AS2331, AS3566 (Australia Standard)
Why choose Happy Prefabricated Warehouse?
Our experience to build the warehouse more 300 projects. We are a manufactory so we can control quality of steel structure warehouse than on-site construction systems. Our experiences in the construction of prefabricated warehouse for 14 years. We have been building the warehouse since 2006. We are a company all of construction system, drawing plan including build the foundation contracture. Moreover, the quotation is according the price on our website an actual material calculation program.
- Metal sheets roof is Clip Lock type. We offer a 3-year warranty on leaks and a 10-year warranty on the structure.
- Galvanize Structure Roof and Purlin makes it resistant to rust, strength 3500 KSC.
- The roof structure is Clip Lock Type. No install of screws from the roof, reducing the risk of roof leaks.
- The customer makes a contract to the contractor directly for guarantee for customers will be confident in the company. Not through a middleman.
loading...
สร้างบัญชีผู้ใช้งาน หรือสมัครเป็นตัวแทนจำหน่าย เพื่อเปิดโอกาสทางธุรกิจแห่งความสำเร็จ